Radio Propagation Software for the iPhone, iPad, and iPod
Once again, a giant ferrite toroid coil saves the day. I have a random wire antenna (about 100 foot long) running into the basement workshop, fed with RG-6 coax (the coax shield is left floating at the antenna end). Reception was horrible, I could barely hear anything, even SWBC stations. I considered that maybe it wasn’t a lack of signal problem so much a signal to noise problem, so I located a large ferrite toroid coil from the junkbox, wrapped as many turns of coax around it as I could (about a dozen), and placed that in series with the incoming coax, just before the radio. Voila, the noise/hash was gone. The choke helps to reduce RFI flowing as currents on the shield of the coax.
The ferrite core was a Fair-Rite 5943003801, 61 mm toroid, type 43 ferrite. I buy mine from Mouser for about $4 each: http://www.mouser.com/ProductDetail/Fair-Rite/5943003801
Here’s a photo showing how the coax is wrapped around the toroid core:
And here are some before and after video recordings. The gap about half way through each is when I disconnected the incoming coax to the radio, and inserted the choke, and then reconnected the coax: